For over twenty-five years, VecLoader vacuums have provided solutions to industry and contractors alike for the recovery, removal and transport of a wide range of materials - from cement, petrochemical products, sand, activated carbon, fly ash and roofing rock to liquids, waste water and slurries. Other solutions include recovery and reclassification systems for steel grit, and other abrasives and hazardous materials like lead dust and asbestos.

Performance Proven Vacuum Solutions™

QVRL Regenerative Vacuums
 
Extra Storage and Filtration
Well Suited for Multiple Operators
26" Diameter Systems

If you need to clean-up super-fine powders fast  ..  then please, read on!

The Hercules "QVRL” Regenerative Series vacuum system features the filter area you need with your choice of air flow. Trouble-free 99.9% efficient filters let you take control of fine powders - without stopping.

There are three models in this series.  Now you can buy a system that will support up to four (4) operators at the same time at a price that you can afford.  Coupled with goof-proof filtration, it's a win-win decision.

And like all our portables, each model features an available inline safety filter that can easily be upgraded to a HEPA type.

Regenerative Series Common Features:

  • Super-quiet, continuous duty regenerative vacuum producer

  • TEFC 3600 rpm high efficiency motor

  • 52.8 square feet of primary filter media

  • Filter efficiency of 99.99% @ 0.4 microns, standard

  • Effective internal filter bag shaker

  • 10" front wheels (with bearings), heavy-duty 5" rear casters

  • Built in silencer for smooth, quiet operation

  • Heavy duty, all steel frame, 29"w x 50.5"l x 75"h
     

SPECIFIC FEATURES: QVR85L QVR120L QVR150L
System Horsepower 8.5 Hp 11.5 Hp 15.0 Hp
CFM (Maximum) 385 scfm 385 scfm 555 scfm
Vacuum (Maximum) 125 " H20 141 " H20 130 " H20
Primary Filtration (sf) 52.8 52.8 52.8
Secondary Filtration (sf) 22.8 22.8 35.5
Total Filtration (sf) 75.6 75.6 88.3
Air to Cloth Ratio 5.1:1 5.1:1 6.3:1
Storage Capacity (USG) 29.3 29.3 29.3
Noise Level @ 3ft 75 dBa 79 dBa 85 dBa
Weight 610 lbs. 680 lbs. 705 lbs.

SELECTION NOTES:

The selection between these models is determined by use. Generally, the longer the vacuum hose and the heavier the dust load, the more suction you will want.   If the powders you need to deal with are below 5, look for a machine with a air to cloth ratio less than 6.5:1.

QVR85L

Our popular mid-range model with super-sized filtration system.  Suitable for two operators each with a 1-1/2" I.D. hose x 50 ft.  Use with high material loading rates for trouble free operation with ultra-fines.  Better efficiency and lower maintenance than pulse jets!

QVR120L The powerful 12 Hp vacuum producer makes a tremendous central vacuum capable of supporting a pipe network up to 250 feet long.  Will handle the worst sub-micron fines with ease.
QVR150L

Supports up to four operators each with a 1-1/2" hose up to 150 feet long.  And capable of supporting a central vac pipe network up to 200 feet long.  Easily handles sub-micron fines.

 

Need help deciding which size is right for you?
Refer to our Selection Chart, or call A Vector Sales Representative.