For over twenty-five years, VecLoader vacuums have provided solutions to industry and contractors alike for the recovery, removal and transport of a wide range of materials - from cement, petrochemical products, sand, activated carbon, fly ash and roofing rock to liquids, waste water and slurries. Other solutions include recovery and reclassification systems for steel grit, and other abrasives and hazardous materials like lead dust and asbestos.

Performance Proven Vacuum Solutions™

QVR Regenerative Vacuums

If you need to clean-up super-fine powders fast  ..  then please, read on!

The QVR Regen Series takes fine powders in stride by combining a super-efficient, triple filter system with a strong, super-quiet  regenerative type vacuum producer. Now you can quickly vacuum powders like carbon black and powder paint - without filter hassles and clogs!

There are four models in this series.  A new modular construction means you can choose the suction you want with the filtration and storage canister you need.  And like all our portables, each model features a high efficiency, cartridge type inline filter that can easily be upgraded to a HEPA type filter.

COMMON FEATURES:

  - super-quiet, continuous duty regenerative vacuum producer, TEFC
  - primary filtration efficient to 99.99% @ 0.4 microns, standard
  - inline filter for operator protection, easily upgrades to HEPA type
  - effective internal filter bag shaker
  - filter condition indicator
  - 12" front wheels (with bearings), heavy-duty 6" rear casters
  - forklift channels and crane lift on all systems, standard
  - heavy duty, all steel frame construction 29"w x 50.5"l x 70"h
  - a beautiful, baked enamel, high gloss finish

SPECIFIC FEATURES: QVR50 QVR60 QVR85 QVR120
System Horsepower 5.1 Hp 6.1 Hp 8.5 Hp 11.5 Hp
CFM (Maximum) 219 scfm 219 scfm 385 scfm 385 scfm
Vacuum (Maximum) 113 " H20 127 " H20 125 " H20 141 " H20
Primary Filtration (sf) 30.8 30.8 30.8 30.8
Secondary Filtration (sf) 22.8 22.8 22.8 22.8
Total Filtration (sf) 53.6 53.6 53.6 53.6
Air to Cloth Ratio 4.1:1 4.1:1 7.2:1 7.2:1
Storage Capacity (USG) 25.2 25.2 25.2 25.2
Noise Level @ 3ft 77 dBa 77 dBa 75 dBa 79 dBa
Weight 610 lbs. 610 lbs. 680 lbs. 795 lbs.

SELECTION NOTES:

The selection between these models is determined by use. Generally, the longer the vacuum hose and the heavier the dust load, the more suction you will want.   If the powders you need to deal with are below 5, look for a machine with a air to cloth ratio less than 6.5:1.

QVR50

The QVR50 is ideal for ultra-fine powders where you need a 1-1/2" or 2" I.D. hose up to 50 ft long.  Quiet and dependable, it is recommended for moderate housekeeping, or tough jobs like pigment color changes.  Supports a central vac tube system up to 100 ft long..


QVR60 The QVR60 is ideal for ultra-fine powders where you need 2" I.D. hose up to 50 ft long.  Quiet and dependable, it is recommended for moderate housekeeping, or tough jobs like pigment color changes.  Supports a central vac tube system up to 150 ft long.
QVR85 The QVR85 is the system to get when you want the best power in the super-quiet regenerative line.  Suitable for two operators each with a 1-1/2" I.D. hose x 50 ft, its triple filter assures trouble free operation with ultra-fines.
QVR120 The powerful QVR120 vacuum producer makes a tremendous central vac capable of supporting a pipe network up to 250 feet long. 

Need help deciding which size is right for you?
Refer to our Selection Chart, or call A Vector Sales Representative.