For over twenty-five years, VecLoader vacuums have provided solutions to industry and contractors alike for the recovery, removal and transport of a wide range of materials - from cement, petrochemical products, sand, activated carbon, fly ash and roofing rock to liquids, waste water and slurries. Other solutions include recovery and reclassification systems for steel grit, and other abrasives and hazardous materials like lead dust and asbestos.

Performance Proven Vacuum Solutions™

QV Compact Vacuums

Tired of vacuum filters that let fine powders blow right through? Or that are constantly blinding?  Then please, read on!

The QV "Compact Series" was specifically designed to handle dry, ultra-fine powders without the filters blinding. An ultra-efficient, triple filter system allows operators to continuously vacuum powders like toner dust and pigments - without filter hassles and clogs!

All three sizes in the Compact Series feature a quiet, continuous duty, regenerative type vacuum producer. And, like our larger systems, they all come with a high efficiency, cartridge type inline filter that can easily be upgraded to a HEPA type filter.

 

COMMON FEATURES:
  - 20.9 s.f. of primary filter area 99.99% @ 0.4 microns, standard
  - 13.8 s.f. of secondary filter area, easily upgrades to HEPA type
  - 34.7 s.f. of total filter area
  - 18.0 US gallons of material storage capacity
  - 12" front wheels (with bearings), 5" rear casters
  - heavy duty, all steel frame construction
  - a beautiful, baked enamel, high gloss finish:

SPECIFIC FEATURES: QV300 QV500 QV600
System Horsepower 3.0 Hp 5.0 Hp 6.1 Hp
CFM (Maximum) 145 scfm 219 scfm 219 scfm
Vacuum (Maximum) 96 " H20 113" H20 127" H20
Typical Design Conditions 85 scfm @ 50" 135 scfm @ 50" 140 scfm @ 70"
Air to Cloth Ratio 4.1:1 6.3:1 6.3:1
Noise Level @ 3ft 73 dBa 77 dBa 77 dBa
Weight 425 lbs. 460 lbs. 510 lbs.

SELECTION NOTES:

QV300 The QV300 makes a tremendous little machine for direct connection to a spot pick-up where a continuous duty vac is required.  It is recommended for light housekeeping of fine powders with a single 1.5" I.D. hose up to 25 ft long.
QV500 The perfect heavy-duty compact?  The QV500 combines decent power with triple filtration to handle ultra-fine, dry powders.  This little vac works great with either a 1.5" or 2.0" I.D. hose up to 50 ft. long.
QV600 Useful as an entry level small multi-operator central, or where a super-maneuverable compact is required to support a 2" I.D. hose up to 50 ft. long.  If sub-micron fines are to be vacuumed, consider instead the QVR60.

Need help deciding which size is right for you?
Refer to our Selection Chart, or call a Vector Sales Representative.