For over twenty-five years, VecLoader vacuums have provided solutions to industry and contractors alike for the recovery, removal and transport of a wide range of materials - from cement, petrochemical products, sand, activated carbon, fly ash and roofing rock to liquids, waste water and slurries. Other solutions include recovery and reclassification systems for steel grit, and other abrasives and hazardous materials like lead dust and asbestos.

Performance Proven Vacuum Solutions™

Stand-Alone Cyclonic Baghouses

Inquire about the Rapid Response Vacuum complementing the IS Intermediate Separator line.
Roadworthy Separator Cyclone That Works In Conjunction with Any Vacuum System

Inquire about the Rapid Response Vacuum complementing the IS Intermediate Separator line.
Roadworthy Hepa Filtered Baghouse With Patented Discharge Valve and Hydraulic Lifts

Roadworthy Separator Cyclone Working with Vacuum Truck in Dusty Application
Another View of Roadworthy Separator Cyclone Working with Vacuum Truck

 Trailer Cyclonic Baghouse

Standard Components

 ·            Thirty-Seven reverse pulse-air coated filter bags, 28” long.

·            Collector raises to a standard maximum height of 8'-11", centerline 6'-0" from the rear edge of the trailer. When the cyclone collector is in raised position, it is upheld by rigid support arms. Specially configured collectors with added height are optionally available.

·            54” Cyclone collector with 7/8 yd3 in the conical storage section

·            Hydraulic driven extendible hopper, controls and components powered by customer supplied hydraulic source

·            Full road-ready legal highway package with a heavy-duty ring type hitch, parking brake, electric brakes, bulldog levelers, four LT235-85R-16 radial tires mounted on six lug spoked rims, and all necessary lights for night highway operation

·            12” butterfly valve to break vacuum during dump cycle

·            Customer supplied compressed air (10 CFM @ 100 PSI required)

·            12 volt power cord to be connected to vacuum source

·            Vacuum time cycle timer

·            Replaceable wear plates and deflector plates

·            8” hopper outlet hose

·            6” replaceable hopper inlet pipe

·            Standard gravity hopper discharge (Discharge is flanged to accept other optional discharge valves)

·            Two air reservoir tanks - to be connected to vacuum source for air supply

·            Standard polar white enamel paint

 Available options include:

·            Air operated impact vibrator on cone with on/off manual valve at control panel area.

·            Combination air compressor (for bag pulsing, butterfly and/ or optional vibrator) and hydraulic (for lifting cyclone) power pack or:

·            Hydraulic only package- 115 VAC

·            Air compressor only package including gasoline engine for bag pulsing, butterfly and/ or optional vibrator.

·            Explosion venting and grounded filter bags.

·            Hydraulic lifts to allow raising unit to a dump height of 11.5 feet or more.

·            Special unloader valves for continuous vacuuming, including rotary valves, double dump or posi-seal valves.

·            Special paint and paint schemes.  


Please click on IS Series Intermediate Separators and BH Series Cyclonic Baghouses for more detailed technical and sales information.