BH™ Series Cyclonic Baghouses/Collector Devices: Configured in modular format for matching to Vector Technologies PM Series Power Modules or alternative vacuum sources to meet specific filtration and unload requirements. Units are set on legs at customer designated heights feature tangential inlets, deflector plates, removable wear plates, pulsed-cleaned Teflon coated filters, plus magnehelic gauges for filter monitoring.

BH™ Series Cyclonic Baghouses/Collector Devices are available in 112 cm, 137 cm, 183 cm, 234 cm and 274 cm. Sizing will be determined by the vacuum airflow and product specific requirements.

Vector Technologies offers a wide range of product specific options to enhance use of BH Series Cyclonic Baghouses as well as other Vector collection modules, and unloading stations. These options are available on all size collectors and include:

Specialty unloader valves to allow for continuous vacuuming including rotary valves, double dumps, posi-seal valves or system specific dumping/control devices.

Product specific filtration media and filter systems including high temperature filters and grounded filter bags.

Integrated air compressor packages

Explosion/Rupture disks

Bin Indicator (monitored) for overload conditions

Pin leg extensions

Hydraulic, air or electric height adjustors for raising or lowering of cyclone.

Hydraulic, air or electric controls for raising or lowering of dump valve for special unload operations.

Single or double pneumatic or electric vibrators to assist hopper discharge.

Air cannons or water injectors for fluidizing or wetting of non-flowable materials.

Special cone slopes to improve hopper discharge of difficult material.

Automatic dump control timer packages for hopper use with alternative vacuum source.

Remote operator stations

Stainless steel cyclones

Specialized hopper coatings for corrosive materials and/or material discharge improvement.

Crane lifting eyes

Epoxy or special paint systems.

IS™ Series Intermediate Separators:

IS™ Series Intermediate Separators are available in 112 cm, 137 cm, 183 cm, 234 cm and 274 cm. Sizing will be determined by the vacuum airflow and product specific requirements.

Vector Technologies offers a wide range of product specific options to enhance use of IS Series Intermediate Separators as well as other Vector collection modules, and unloading stations. These options are available on all size collectors and include:

Specialty unloader valves to allow for continuous vacuuming including rotary valves, double dumps, posi-seal valves or system specific dumping/control devices.

Integrated air compressor packages

Explosion/Rupture disks

Bin Indicator (monitored) for overload conditions

Pin leg extensions

Hydraulic, air or electric height adjustors for raising or lowering of cyclone.

Hydraulic, air or electric controls for raising or lowering of dump valve for special unload operations.

Single or double pneumatic or electric vibrators to assist hopper discharge.

Air cannons or water injectors for fluidizing or wetting of non-flowable materials.

Special cone slopes to improve hopper discharge of difficult material.

Automatic dump control timer packages for hopper use with alternative vacuum source.

Remote operator stations

Stainless steel cyclones

Specialized hopper coatings for corrosive materials and/or material discharge improvement.

Crane lifting eyes

Epoxy or special paint systems.