For over twenty-five years, VecLoader vacuums have provided solutions to industry and contractors alike for the recovery, removal and transport of a wide range of materials - from cement, petrochemical products, sand, activated carbon, fly ash and roofing rock to liquids, waste water and slurries. Other solutions include recovery and reclassification systems for steel grit, and other abrasives and hazardous materials like lead dust and asbestos.

Performance Proven Vacuum Solutions™

METRIC SPECIFICATIONS:
VECLOADER® 624™ VACUUM LOADER (DIESEL)
Sales Information | US Specs | Metric Specs

The VecLoader 624 is a versatile trailer-mounted industrial vacuum loader that never needs to be removed from the vacuuming site for dumping. It can be used for vacuuming coal, ash, dirt, dust, sand, stone, water and slurry utilizing 15.24 cm diameter hose or multiple smaller diameter hoses. The VecLoader Titan offers rugged construction and powerful performance at a cost that will afford the owner a quick return on his investment. The trailer, along with vacuuming hose and accessories, can be moved by a one ton truck.

VACUUM PUMP: Roots/Dresser Model 624 RCS-J, rotary lobe positive displacement blower.
PUMP RATING: Maximum vacuum of 53% (406 mm Hg) and a maximum air flow of 99 m3/Min (58.50 liters/sec).
PERFORMANCE: Bulk dry materials will load up to 14-17 metric tonnes per hour/or at distances up to 180 meters.
ENGINE: John Deere industrial engine, model 6068TF155.
ENGINE RATING: 6-cylinder; water-cooled turbo diesel; Continuous 127 Kw @ 2400 RPM. (4.5 liter displacement).
SPECIFICATIONS: Belt drive through Rockford PTO; variable operating speeds between 1,000 to 2,400 RPM; mechanically governed; 12 volt electric system; 38 cm/5 blade pusher fan, mounted on water pump; dry type air cleaner.
CONTROL PANEL: Key start, temperature gauge, oil pressure gauge, ammeter, tachometer, air pressure gauge, and hour meter. High temperature and low oil pressure safety shut-downs, clutch engage/disengage control switch, pulse timer, vacuum timer and emergency stop.
FUEL: Fuel -- #2 Diesel, Fuel capacity -- Two each, 190 liter tanks, Running time 8 hours (approximately).
COMPRESSOR: Two stage, driven off the engine accessory drive; rated at .38 cubic meters per minute at 6.2 Bar.
COLLECTOR UNLOAD: Collector raises to a maximum height of 2.59 m at a centerline distance of 1.8 m from the rear edge of the trailer. Controls are included for automatic, cyclical discharge of collected materials. Collector has a pneumatic hopper vibrator and oiler. When the cyclone collector is in raised position, it is upheld by rigid support arms. Discharge is flanged to accept standard flanged gravity spout and other optional discharge valves.
CYCLONE/BAGHOUSE: Cyclone collector with .67 cubic meters in the conical storage section, flanged. Baghouse contains 15.5 square meters of felted polypropylene cloth continuously cleaned by reverse air pulses during the pulse cycle. A magnehelic gauge shows the differential pressure drop across filters.
ADDED FILTRATION: An additional filter with 18 square meters of pleated cellulose microfiltration is on the blower providing final filtration and blower protection.
OTHER FEATURES: Fiberglass enclosure to cover operating components for weather protection, locking latches on doors, regenerative air dryer with electric heater, H.E.P.A. filtration available.
TRAILER: Fully road-ready with tandem 2,721 Kg axles, electric brakes, hand-operated parking brake, hydraulic jack for raising and lowering the trailer tongue, all lights for legal night highway operation, heavy-duty ring-type hitch, LT235-85R-16 radial tires mounted on six lug spoked rims.
Length: 530.86 cm, Width: 250.19 cm, Height: 341.63 cm, Weight: 4.31 tonnes.
Specifications subject to change without notice so that improvements can be made as quickly as possible.

WARRANTIES, SERVICE AND RELIABILITY:
Manufactured, warranted and serviced by Vector Technologies Ltd., Milwaukee, Wisconsin. For almost 30 years, Vector has been a leading innovator of hazardous and non-hazardous material handling equipment. The VecLoader 624 offers the same level of quality, innovation, reliability and field tested features that have made Vector vacuums the standard for reliability and performance in the a wide assortment of industrial markets. The VecLoader Titan carries a six month warranty backed by Vector Technologies and its elite roster of suppliers. Assistance is available via our U.S. toll free hot line at 1 (800) 832-4010. Vector is fully dedicated to providing the finest "after-the-sale" service and support obtainable.

For more information, contact Vector Technologies at (800) 832-4010. In Wisconsin, or outside the United States, please call 1 (414) 247-7100 or fax 1 (414) 247-7110.