For over twenty-five years, VecLoader vacuums have provided solutions to industry and contractors alike for the recovery, removal and transport of a wide range of materials - from cement, petrochemical products, sand, activated carbon, fly ash and roofing rock to liquids, waste water and slurries. Other solutions include recovery and reclassification systems for steel grit, and other abrasives and hazardous materials like lead dust and asbestos.

Performance Proven Vacuum Solutions™

US SPECIFICATIONS:
VECLOADER® 721S VACUUM LOADER (DIESEL)
Sales Information | US Specs | Metric Specs

The VecLoader 721S  is a versatile trailer-mounted industrial vacuum loader used for special applications that never needs to be removed from the vacuuming site for dumping. It can be used for vacuuming coal, ash, dirt, dust, sand, stone, water and slurry utilizing five or six inch diameter hose or multiple smaller diameter hoses. The VecLoader 721 offers rugged construction and powerful performance at a cost that will afford the owner a quick return on his investment. The trailer, along with vacuuming hose and accessories, can be moved by most one ton trucks.

VACUUM PUMP: Roots/Dresser Model 721 DVJ, rotary lobe positive displacement blower.
PUMP RATING: Maximum vacuum of 28" Hg negative static pressure/maximum airflow of 3,660 CFM.
PERFORMANCE: Bulk dry materials will load up to 18-23 tons per hour/or at distances up to 1000' and will load up to 425 gallons of water per minute.
ENGINE: John Deere Model 6076H  industrial diesel engine. (Electric powered units available).
ENGINE RATING: 6-cylinder; water-cooled turbo diesel; Continuous 235 H.P @ 2,600 RPM.
SPECIFICATIONS: Direct drive, variable operating speeds between 1,000 to 2,600 RPM; mechanically governed; 12 volt starter, and 40 AMP alternator with internal regulator; 15"/5 blade pusher fan, mounted on water pump; dry type air cleaner.
CONTROL PANEL: Ignition switch, temperature gauge, oil pressure gauge, voltmeter, tachometer, air pressure gauge, and hour meter. High temperature and low oil pressure safety shut-downs. Pulse timer, vacuum timer and emergency stop.
FUEL: Fuel -- #2 Diesel, Fuel capacity -- Two each, 50 Gallon tanks, Running time 8 hours (approximately).
COMPRESSOR: Two stage, driven off the engine accessory drive; rated at 13.1 ACFM at 90 PSIG.
COLLECTOR UNLOAD: Collector raises to a maximum height of 8'-9", centerline 6'-0" from the rear edge of the trailer. Controls are included for automatic, cyclical discharge of collected materials. Collector has a pneumatic hopper vibrator and oiler. When the cyclone collector is in raised position, it is upheld by rigid support arms. Discharge is flanged to accept standard flanged gravity spout and other optional discharge valves.
CYCLONE/BAGHOUSE: Cyclone collector with 7/8 cubic yards (175 gallons) capacity in the conical storage section, flanged. Baghouse contains 630 square feet of spun-bond polyester filter media continuously cleaned by reverse air pulses during the pulse cycle. The pulsing of the cartridges is controlled by a pressure switch and solenoid valves. A magnehelic gauge shows the differential pressure drop across filters.
SECONDARY FILTER: Pleated cellulose microfilters with 552 square feet of media are mounted on the blower for final filtration and blower protection.
OTHER FEATURES: Regenerative air dryer with electric heater, H.E.P.A. filtration available.
TRAILER: Fully road ready with three 6,000 pound axles, electric brakes, hand-operated parking brake, leveling jacks, all lights for legal night highway operation, heavy-duty ring-type hitch, LT235-85R-16 radial tires mounted on six lug spoked rims.
Length: 21'-0" Width: 8’-2.5" Height: 11'-3.5" Weight: 13,950 Lbs.
Specifications subject to change without notice so that improvements can be made as quickly as possible.

Warranties, Service and Reliability:
Manufactured, warranted and serviced by Vector Technologies Ltd., Milwaukee, Wisconsin. For almost 30 years, Vector has been a leading innovator of hazardous and non-hazardous material handling equipment. The VecLoader 721 offers the same level of quality, innovation, reliability and field tested features that have made Vector vacuums the standard for reliability and performance in the abrasive blast industry. The VecLoader 721 carries a six month warranty backed by Vector Technologies and its elite roster of suppliers. Assistance is available via our U.S. toll free hot line at 1 (800) 832-4010. Vector is fully dedicated to providing the finest "after-the-sale" service and support obtainable.

For more information, contact Vector Technologies at (800) 832-4010. In Wisconsin, or outside the United States, please call 1 (414) 247-7100 or fax 1 (414) 247-7110.